TAS 2KW  “BELIEF”  HEATER KITS

BASIC KIT  $760

CLICK BELOW FOR FULL PRICE LIST AN INFO SHEET

BELIEF-INFO-SHEET-FEBUARY-2KW-2.4KW-4-KW-5KW-AND-GENESIS-oct 2018

INCLUDES

TAS2KW “BELIEF” STANDARD DIESEL HEATER

CONTROL SWITCH FULLY ADJUSTABLE WITH 2 OUTPUTS, HEAT REGULATED OR POWER OUTPUT

WIRING LOOM

FUEL PUMP

BITS BAG FILTER JOINERS

INSTRUCTION MANUAL

FITTING INSTRUCTIONS

COMBUSTION AIR PIPE

EXHAUST PIPE .8M

FUEL LINE 5M

FUEL STRAW

MOUNTING PLATE STANDARD

TAS2KW CARAVAN MOTOR HOME KIT $1075

(WITH HEAVY DUTY MOUNTING PLATE NO TANK) 

---

TAS2KW CARAVAN MOTORHOME KIT    $1240

 (WITH HEAVY DUTY MOUNTING PLATE AND 5 LITRE EASY FIT TANK EXTERNAL MOUNT)

---

 TAS2KW CARAVAN MOTORHOME KIT        $1240

(WITH HEAVY DUTY MOUNTING PLATE AND 10 LITRE EASY FIT TANK)

---

KIT INCLUDES

TAS2KW DIESEL HEATER

CONTROL SWITCH FULLY ADJUSTABLE WITH 2 OUTPUTS HEAT REGULATED OR POWER OUTPUT

WIRING LOOM

FUEL PUMP

BITS BAG FILTER JOINERS

INSTRUCTION MANUAL

FITTING INSTRUCTIONS

COMBUSTION AIR PIPE

EXHAUST PIPE .8M

FUEL LINE 5M

FUEL STRAW

MOUNTING PLATE

SILENT MOUNT FOR FUEL PUMP

COMBUSTION AIR  AIR SILENCER

 MUFFLER AND CLAMPS

DUCTING 1M WITH 2 X DUCTING OUTLETS

MOUNTING BRACKET FUEL PUMP

MOUNTING BRACKET MUFFLER

FUEL TANKS

5L WITH QUICK CONNECT COUPLINGS, FUEL STRAW FITTED, TANK BREATHER, SPLASH BOX $155

10L WITH QUICK CONNECT COUPLINGS, FUEL STRAW FITTED, TANK BREATHER, SPLASH BOX $165

10L WAFER TANK 400 X 400 X 60MM  $195

10L WITH QUICK CONNECT COUPLINGS, FUEL STRAW FITTED, TANK BREATHER, ALUMINIUM  BOX $249

20L MILITARY WITH QUICK CONNECT COUPLINGS AND STRAW FITTED  $195

FREIGHT PER AUSTRALIA POST 4-5 DAYS DELIVERY $60

WARRANTY 12 MONTHS (RETURN TO BASE)

ALL PARTS AND SERVICE AVAILABLE FOR OUR KIT

WE SERVICE WHAT WE SELL

Heat output control and regulation on air heaters work in two ways

Temperature control

In this mode the heater will sense the cold air input coming into the heater and will turn itself up or down depending on the position of the control switch. If the switch is turned down to low this will cause the burner in the heater to go out. When the temperature drops below the control switch setting temperature, the burner will reignite and heating will resume. As the heater requires the glow plug to start the burner flame, the glow plug ignition will draw around 10-12 amps (120w-144w) of current during start-up.

Heat output

In this mode the positioning of the control switch regulates the heat output of the heater – basically the same as a bar radiator. Using this mode does not turn the burner off but turns down the fuel supply and fan speed with the heater only drawing a run current of between 1.5 amps to 2 amps (18W-30W)

Other heaters on the market only use temperature control. In some cases careful positioning of the control switch is required so that the heater does not turn off. If this is not achieved the heater will draw 12 amps on start up for approx 2 minutes before going to its run current – approx 2 amps (on high). This type of regulation is hard on batteries especially if only 1 battery is installed.

Our belief heaters can be set on both temperature regulation or heat output; we recommend setting them on heat output as this gives better battery life and step-less heat output from low to high. This switching is achieved by pushing the up and down arrows together  on the control switch.

 

We have many fuel tank options for caravans, motor homes and portable heaters. Our fitting (labour cost) does not include fuel tank supply as every install is different and depends on customers’ requirements.

We can also supply duct guarding custom installation if required.

PLEASE BE WARY OF THESE TANKS, THEY ARE POOR QUALITY AND LEAK FUEL, AND THE CAPS DO NOT SEAL:

NEW TANKS SUPPLIED IN OUR KITS WITH PUMP, FUEL FILTER AND SILENT MOUNTS ALREADY FITTED

5L WITH SPLASH BOX