Wallas Nordic DT Diesel Cooktop (nDT)


The Nordic Dt ceramic stove and heater is a modern solution for your mobile heating and cooking needs. It is available in either flush mount or surface mount models. The closed combustion chamber design makes cooking enjoyable, with all fumes vented outside, and keeps your cabin fresh and dry.

In stock

SKU: WAL85NDT Categories: , , Tags: , ,

This heat blower lid has a flat construction and the high heating effect as high as 1900W.
Despite the high temperature, the upper surface of the lid is only warm to the touch.
This heater lid is ideal for boats with one roomy cabin.

The Nordic Dt ceramic stove and heater is a modern solution for your mobile heating and cooking needs.
It is available in either flush mount or surface mount models.The closed combustion chamber desigh makes cooking enjoyable, with all fumes vented outside, keeping your cabin fresh and dry.

A real heater
With a 270 heat blower lid you can transform your stove into a cabin heater!
85 Dt + 270 is a perfect heating and cooking system into boats with one cabin!
No propane
Get rid of propane and forget carrying heavy gas bottles into your boat.
Save gas bottle lockers space for better uses.
The Wallas diesel combustion process eliminates the need for hazardous heavier-than-air gaseous fuels.
No naked flame
An open flame in a boat is always hazardous. None of the Wallas cookers have an open flame.
An open flame also creates moisture in your boat.
Unlike propane systems, Wallas stoves draw combustion air from the cabin and exhaust overboard. This process dries the cabin interior.
Fuel your stove with your boat
If you have a diesel engine, it is very convenient to pick up the diesel for your stove from the main tank with our fuel feed.
We have also separate diesel tanks for gasoline engine users.
2+1 year warranty for all Wallas products. Register your unit here and get 3rd year of warranty.
To ensure highest quality, every single Wallas product is carefully tested before delivery.
Build your own Wallas kit
Wallas accessory helper helps you to gather just right installation accessories for your own needs.
Accessory helper also finds your local distributor and/or dealer and sends the request for quotation to them.

People often ask, “How do diesel cooktops compare with gas, and how long does it take to boil the jug?” Well, it depends on a few factors, but to keep it short the answer is it does take a little longer.

We have done some heating tests on our Wallas cooktops. We used an XC Duo, but the following applies to all Wallas diesel cooktops. Lets look at a few things. Gas is instantaneous heat, Wallas diesel cooktops require time to get started. After doing some tests we found that with 2.0L of water in a jug at 16.5 °C using gas it takes 13 minutes while using a diesel cooktop it takes 18 minutes to boil.

The drawback with diesel cooktops is that it takes 12 minutes for the cooktop to reach maximum temperature (500 °C ) making the total time to “boil the jug” 30 minutes from stove switch on. It does take some planning when using diesel; when you get up in the morning to “boil the jug” and do what nature needs you to do, just turn the cooktop on and when you come back it is up to temperature ready to put the jug on. Of course, if the stove is already on from boiling the jug, cooking brekkie right after will save that startup time.

When you are on holidays, does 10-15 minutes extra make a difference when compared to the enormous advantages of Wallas diesel cooktops over gas (safer, no condensation, cheaper to run, easier to fill, no compliance issues)? You, the customer, need to work that out for yourselves, but here at Dieselheat, we think the benefits usually speak for themselves.

Power:900-1900 W 3000-6500 BTU
Operating voltage:12 V
Electricity consumption:0.55-0.85 A (+ stove included)

85 Nordic DT Installation Manual

All Wallas products sold by Dieselheat carry 24 MONTHS warranty from date of purchase. Warranty is return to base which means you are responsible for returning any defective products to us for repair.

If you have an issue every attempt will be made to fix it via phone or email. Warranty is on the appliance and does not cover any issues caused by installations performed by the customer or other parties. If we can’t fix any issues with heater operation over the phone or email then the unit and possibly other parts as we suggest to you depending on the issue must be returned to us using at your expense.

On arrival at our premises we will set the unit up on our test bench to ascertain what problem has occurred. Any defects or issues will be fixed free of charge and the unit will be shipped back to you at our expense. If the unit operates without any problems it will be deemed an installation problem and this is not covered by warranty. Any costs involved in returning the unit to the customer is at your expense.

Please do not try to disassemble the product yourself whilst it is still under warranty without consulting with Dieselheat.