Generic selectors
Exact matches only
Search in title
Search in content
Generic selectors
Exact matches only
Search in title
Search in content

Silicone High Temperature Floor Plate for DH Hydronic-12

$66.00

This floor plate and high temperature silicon insert allows the Genesis II hot water system exhaust to exit through the floor.

In Stock

SKU: ULTFP_old Categories: , Tag:

This floor plate and high temperature silicon insert allows the DH Hydronic-12 hot water system exhaust to exit through the floor. It includes a stainless steel plate and high temperature silicone rubber mat which forms a water and dust proof seal around the exhaust and air inlet as they pass through a floor opening. It can be included with the DH Hydronic-12 mounting bracket.
The silicon mat is 3mm thick and the metal plate is 2mm thick and the total size of the plate is 200mm x 130mm.

Note: The silicon mat is not pre-punched to allow final location of the holes to suit the specific installation. Holes can be cut in the silicon with a sharp knife.

This floor plate and high temperature silicon insert allows the DH Hydronic-12 hot water system exhaust to exit through the floor. It includes a stainless steel plate and high temperature silicone rubber mat which forms a water and dust proof seal around the exhaust and air inlet as they pass through a floor opening. It can be included with the DH Hydronic-12 mounting bracket.
The silicon mat is 3mm thick and the metal plate is 2mm thick and the total size of the plate is 200mm x 130mm.

Note: The silicon mat is not pre-punched to allow final location of the holes to suit the specific installation. Holes can be cut in the silicon with a sharp knife.

BRANDS YOU KNOW & TRUST

Two Year Warranty

All our products are backed by a minimum two year warranty.

We're here to help

Give us a call on:
0418 130 971

Express Delivery Australia Wide

Freight calculated on check out.