Low flow shower heads
Water Saving Low Flow Shower Heads
Any RV user knows that water is the most important item when travelling. If you carry too much, you carry unnecessary weight, and if you don’t carry enough, showers and washing up become a thing of the past. We now stock two Water Saving Low Flow Shower Heads:
UltraMax Ultra Low Flow Shower Head 2.36L\min
Navy B100 Max Low Flow Shower Head 3.78L\min
UltraMax Ultra Low Flow 2.36L\min Shower Head
This ultra low flow shower head is perfect for RVs, campers, cabins, boats and other situations where ultra low flow is a must. The UltraMax is performance tested with a FIT™ Value of 9.33, which makes it our most efficient shower head with one of the lowest flow rates of any shower head in the industry. This is ultra low flow shower head technology at its best.
Our Navy showerheads offer complete control; allowing you to conserve even more water. Enter the shower and take the first 15-20 seconds to wet your entire body, then reach up and slide the “navy” valve to the off position. Lather up your entire body and hair and then reach up and slide the valve back to the on position and rinse yourself clean. Total shower time is less than 3 minutes, but only 1 minute of actual water consumption. And, the B100 Max Navy provides a very low flow as 3.78L\min
How Does It Work
WATER SAVING SHOWER HEAD
HOW DOES THE 1.25 GPM SHOWERHEAD WORK?
This water saving shower head starts with water entering our patented VACUUM flow “booster” valve where it is aerated and compacted under pressure. Due to the intense force of the vacuum chamber, the aerated water “explodes” as it exits the shower head, creating a powerful shower stream at a very low flow rate (1.25 gallons per minute or less). When you want the best water saving shower head on the market choose the Bricor Low Flow Shower Head.
The force of the vacuum booster valve increases the shower stream flow impact intensity by 1.75x over other conventional low flow shower streams.
Low Flow Shower Head Saves Water and Energy
By reducing the consumption of hot water, our patented aeration technology significantly lowers gas and water expenses as well as electrical costs for pumping. Effluent costs are also reduced. Choosing 1.25 GPM shower head or less saves the most water, energy and money.
Helps Solve Low Pressure Problems
Bricor’s residential and commercial shower heads not only save money on water consumption, but also resolves low water pressure. The powerful release from the vacuum chamber creates a pressure boosting effect that counters the weak flow stream that accompanies low water pressure (from 9 psi on up)
Low Flow Shower Head Technology Reduces Scale
When water enters the vacuum chamber, droplets are large and relatively slow-moving (a very undesirable trait in a flow stream). Under the intense vacuum force water droplets are compacted and highly energized. As they exit the vacuum chamber the smaller droplets both expand and vibrate rapidly. This combination of vibration, smaller-sized droplets and increased velocity dramatically reduces the formation of mineral crystals (scaling) by eliminating attachment sites on the front face of the spray plate.
Navy shower head $160