This kit includes everything required to install the 1.8kW ducted fan head with 1 outlet on a Dieselheat diesel hot water system. The kits includes the electronically controlled coolant valve which plugs into the Dieselheat thermostat to shut down coolant in the fan heater when not in use, this minimises excess heat from the system when air heating is not needed.
Suits installations where the fan heater is within 1m of the hot water system and no more than 0.5m above it.
Kit Includes
- 1 x Electronically controlled coolant valve
- 4 x 16mm stainless hose tails
- 2m x 16mm heater hose
- 6 x hose clamps
- 90mm return air vent
- 1m of 60mm ducting
- 1 x Eberspacher 60mm warm air outlet vent
- 2 x 60mm ducting clamps
Note: This install kit is designed to work with the DH Hydronic diesel hot water systems configures for internal coolant bypass (refer to install instructions) so that the coolant valve does not prevent coolant circulation in the furnace when closed.