Bluetooth App user Instruxtions for Belief 2.2kW and 4kW SP ALT heaters.
Installation and use of the Bluetooth App is the owners responsibility, Dieselheat cannot provide any phone or email support for use of the App.
Which heaters support Bluetooth
Belief 2.2kW and 4kW SP ALT heaters – as noted on the top of the heater by the SP ALT mark support bluetooth using the rotary or digital control.
Turning On Bluetooth
Before connecting the App – Bluetooth must be enabled on the controller.
Rotary Controller
To Enable Bluetooth:
Rotate the knob to the minimum value, press and hold the ℃ key, the yellow light lights up, rotate the knob to the maximum value, the red light lights up, then both lights go out.
To Disable Bluetooth:
Rotate the knob to the minimum value, press and hold the ℃ key, the yellow light lights up, rotate the knob to the maximum value, the green light lights up, then both lights go out.
Digital Controller
Enable Bluethooth in the settings.
Download the App
Follow the link below or scan the QR code to get the App.
https://drive.google.com/file/d/1x2Gah9i3x9XNzAfbna7d3P1irPRYTHLg/view?usp=sharing
You will need to tell your Android phone to ignore some security warnings aimed at preventing apps not in the Play Store being installed.
Open the App, when it opens you will be prompted to connect a new device.
A list of bluetooth devices in the vicinity will show.
The Default Bluetooth Name for the Rotary Controller is 204@BLF
The Default Bluetooth Name for the Digital Controller is 210@BLF
Click the device with that name, or the device with the strongest signal.
Once connected the app will open and the heater can be controlled from this screen.
Search in the app store for the MyBluee App and install via the app store.
Connect the App to the heater
First Connection
Position the phone close to the controller. Open the App and the device connection screen will appear immediately.
A list of bluetooth devices in the vicinity will show.
The Default Bluetooth Name for the Rotary Controller is 204@BLF
The Default Bluetooth Name for the Digital Controller is 210@BLF
Click the device with that name, or the device with the strongest signal.
Once connected the app will open and the heater can be controlled from this screen.
