Can I install a water heater myself?

If you are mechanically minded, the short answer is yes. The Genesis II comes as a single modular unit. The basic steps are:

  1. Mount the unit using the 4 bolt holes on the unit itself.
  2. Attach hot and cold water outlets.
  3. Mount the on\off switch.
  4. Vent the exhaust and combustion air inlet.
  5. Connect the power to the unit.

It would be up to you to design where the fuel tank will go and how the electrical is connected. Also, please use a qualified plumber and electrician when and where required.

We do have an optional mounting bracket and/or a silicone pad and floor plate that might make things easier if needed.

BRANDS YOU KNOW & TRUST

Warranty Icon

Two Year Warranty

All our products are backed by a two year warranty.

Phone Icon

We're here to help

0418 130 971

Shipping Icon

Express Delivery

Freight calculated on check out.